Add Accessories to Your Order.

Hydraulic Lines for Dinghy Davit XL500

Hydraulic Lines for Dinghy Davit XL500

Picture showing hydraulic line with fitting BSP 1/8 Female to Female which is used between hydraulic cylinder and True-hull fitting

L200 Lift Arm

L200 Lift Arm

A replacement lift arm for the L200 Series Lifts

XL500 Lift Arm

XL500 Lift Arm

A replacement lift arm for the XL500 Series Lifts

778-716-0456
Special Limited Time Offer

Free Second Remote with code PRESTO2022 until September 1st, 2022

XL500F - Jet Ski Lift or Dinghy Davit recommended for shorter yacht swim platform.

$ 15,080.00 USD

€ 12 850,00 EUR

XL500F offers a robust, easy-to-install fixed davit system for your PWC or dinghy. It's Designed for platforms at least 20 inches deep, with a lift capacity of 1000 lbs, and easy to use. The model has won the hearts of our customers across the globe.

Product Description

  • The Fixed Series is designed to fit smaller swimplatforms.
  • Everything is above the waterline and made instainless steel.
  • It's a hydraulic davit system, providing effortlesslifting and storage.
  • Ideal swim platform storing of your dinghy or PWC onyour boat or on a floating dock.
  • Self-adjusting keel accommodates all hull designs, fromplastic inflatables to aluminum hulls and all brands of PWC.
  • CE-approved for safety and quality assurance.
  • Plus, a 50% money-back guarantee is available -contact us for more information.

Our Swedish brand is dedicated to providing the very best in lifttechnology for your PWC.

The model F series, require a swim platform with adepth of at least 20 inches/500mm. XL 500 is our dinghy lift model designed for heavy-duty tenders to offereffortless lifting and storage for your dinghy.

The XL500 has won the hearts of our customers across the globe. It'slike a dependable friend that you can easily attach to your boat's swimplatform. What's even more convenient is that, in most scenarios, you caninstall it while your vessel is still peacefully floating in the water.

Our dinghy davit system is built to last, its a smart investment for anyboating enthusiast who demands the very best. The boat davits, provides a secure and stable way to store your dinghywhile running your boat. It is reliable even in bad weather. With the abilityon a lift capacity up to 1000lbs, our davit boat lift is well suited forheavier inflatable dinghies as Williams jet tenders, SeaDoo, Highfield, Zodiacand many other brands.

XL500 lifting davits is made of duplex 1.4462 and designed to neverbreak, and we've tested it with over 1000 lift cycles at full capacity. We'reso confident in its durability and we've also noticed a demand for used systemsand are committed to being environmentally responsible that we offer a minimum50% money-back guarantee.

If you no longer need the lift, we'll help you to sell it, for moreinformation about our 50% money-back guarantee, please contact us.

So with this product, you can enjoy your boating experience withcomplete peace of mind, knowing that your dinghy is always ready for use whenyou need it.

Option to increase your swim platform space.

Maximize your investment in the L200 and XL500 Dinghy Lifts with ourPlatform. It provides an extra swim platform with safe and stable space forbathing and easier access to your boat. Enjoy increased functionality, easyinstallation, and perfect compatibility with L200 and XL500 Lift. Don't missout on this innovative and functional solution!

Read more about the product here!

Read more
Read less
Made for
 PWC's
 &
 Tenders/Dinghys
Rail Series Hydraulic Lift
Fixed Series Hydraulic Lift
Lifting Capacity of 
1000
lbs

Add to Cart

Select your Rail Length Below. For Custom Rail Lengths, please Contact Us.

Not Sure if this product is right for you?

Use our online Configure & Price form to discover what lift is right for you.

Configure & Price Your Lift

How much weight does a PrestoMarine® lift add to my boat?

The L200 lift itself adds 155 pounds (70 kg) to your swim platform. The XL500 lift weighs 180–200 pounds (80–90 kg) depending on what type of bracket you choose. With rails you have the higher weight. However, inside your engine room or Lazaretto we must add a hydraulic pump that weighs 38 pounds (17 kg) including one gallon of hydraulic fluid.

The L200 lift itself adds 155 pounds (70 kg) to your swim platform. The XL500 lift weighs 180–200 pounds (80–90 kg) depending on what type of bracket you choose. With rails you have the higher weight. However, inside your engine room or Lazaretto we must add a hydraulic pump that weighs 38 pounds (17 kg) including one gallon of hydraulic fluid.

Should I buy a lift with fixed (F) brackets or the rail (R) system?

If your platform is less than 24 inches (600 cm) long, you should buy an “F” or “fixed system” because the rails will not help balancing the weight on your boat. The dinghy is already as close to transom as possible. With platforms over 32 inches (900 mm) long, you can choose either one of them. The “R” or “rail system” is to get the weight of your PWC close to the transom so that the boats center of gravity does not move too far aft.

If your platform is less than 24 inches (600 cm) long, you should buy an “F” or “fixed system” because the rails will not help balancing the weight on your boat. The dinghy is already as close to transom as possible. With platforms over 32 inches (900 mm) long, you can choose either one of them. The “R” or “rail system” is to get the weight of your PWC close to the transom so that the boats center of gravity does not move too far aft.

Will the additional weight on the stern reduce my boats’ performance?

Any time you add weight to the transom of a boat you will affect performance. The trick is to minimize the lift weight and to keep the center of gravity forward over the swim platform. Our system will keep your tender/pwc untouched by acceleration or deceleration wakes and is less likely to be affected by following seas. Because of the low weight of our lift system we have less impact compare to hydraulic platforms.

Any time you add weight to the transom of a boat you will affect performance. The trick is to minimize the lift weight and to keep the center of gravity forward over the swim platform. Our system will keep your tender/pwc untouched by acceleration or deceleration wakes and is less likely to be affected by following seas. Because of the low weight of our lift system we have less impact compare to hydraulic platforms.

Max Lifting Weight (lbs)
1000
lbs
Swim Platform Depth (inches)
Less than 30"
Product Information
Height
35.4
cm
Width
5.1
cm
Length
46.9
cm
Weight
2816
grams
Product Materials
Duplex 1,4462
Product Exterior Finish
Powder Coated
Wireless Controlling
Optional
/ 1 Remote Included
Required Voltage
12V / 24V
Keel Supports
2 for Tenders, 1 for PWC

Product Photos

No items found.

Product Spec Images

No items found.

Our Customer Success Stories

Read and watch how our customers love their PrestoMarine® Lift.

When I bought my new boat, I wanted a good solution in order to bring the Jet used by my son. PrestoMarine® Lift proved to fulfill my wishes. This patent is genius, simple, and the speed of operations is the main advantages. Wherever I land my boat, people gather around and want me to demonstrate the lift. I am so happy with my PrestoMarine® Lift and with the amazing service MA Products provides.

Steven
Victoria, BC
Nord West 560

I use my PrestoMarine® Lift to be able to bring my RHIB when I’m out at sea. I used to have it dragging behind my boat but this is a much better solution. The lift works to my full satisfaction. In just a minute I can launch and haul the RHIB on and off the platform. PrestoMarine® Lift is a really great product many boat owners will enjoy.

Thomas
Halifax, NS
Grand Banks 47

Ready to Order Your New Lift?

Configure and Price your lift today and start loving boating again.