Add Accessories to Your Order.

Hydraulic Lines for Dinghy Davit XL500

Hydraulic Lines for Dinghy Davit XL500

Picture showing hydraulic line with fitting BSP 1/8 Female to Female which is used between hydraulic cylinder and True-hull fitting

L200 Lift Arm

L200 Lift Arm

A replacement lift arm for the L200 Series Lifts

XL500 Lift Arm

XL500 Lift Arm

A replacement lift arm for the XL500 Series Lifts

778-716-0456
Special Limited Time Offer

Free Second Remote with code PRESTO2022 until September 1st, 2022

L200F - Dinghy Davit or Jet Ski Lift our smallest lift made especeally for SEA DOO SPARK

$ 11,700.00 USD

€ 10 200,00 EUR

PrestoMarine's L200F is an ideal, easy-to-install lift for lightweight PWC or dinghies with a 500lb capacity. It offers high performance, low maintenance cost, and an optional platform expansion for extra swim space.

Product Description

  • The Serie F is designed for smaller swim platform.
  • 30 seconds it what it takes to launch your tender withwireless remote-control.
  • Low maintenance cost
  • Self-adjusting keel to fit all hull designs such asplastic inflatable dinghy, Aluminum hulls, all brands of PWC (SeaDoo Spark).
  • Easily mounted on the swim platform and in most casescan be installed while the vessel is in the water.
  • The Lift is made in material stainless steel andpowder coated to be highly reliable and durable, even in saltwater.
  • The lift has been thoroughly tested and is certifiedcompliant with all applicable safety standards as CE-approved.
  • Installation of the lift can be done quickly andeasily and requires no special tools or expertise.

Looking for a high-quality dinghy davit system for your inflatable or PWC?

Look no further than PrestoMarine's L200! Our Swedish brand focuses on providing the best lift technology for all type of watercraft. We prioritize durability, reliability, and ease of use.

Our L200 electrical lift is designed specifically for inflatable boatsor as a seadoo lift. Its the perfect choice for those who demand the very bestin performance and functionality.

With a lifting capacity of 500lbs, the L200F model is the perfect tolaunch a lightweight dinghy or PWC. The lift arms are fitted with adjustablekeel supports suitable for flat-bottomed PWCs or dinghies with deeper V-shapedhulls.

So whether you're looking to lift a Seadoo Spark or as dinghy davit forswim platform lift, the L200 is the perfect solution. Our lift is designedspecifically for boaters. We are dedicated to delivering the highest quality,dependability and customer service.

So why wait? Choose our smal boat lift L200 lift today and experiencethe very best in lift technology!

Option to increase your swim platform space.

Maximize your investment in the L200 and XL500 Dinghy Lifts with ourPlatform. It provides an extra swim platform with safe and stable space forbathing and easier access to your boat. Enjoy increased functionality, easyinstallation, and perfect compatibility with L200 and XL500 Lift. Don't missout on this innovative and functional solution!

Read more about the product here!

Read more
Read less
Made for
 PWC's
 &
 Tenders/Dinghys
Rail Series Hydraulic Lift
Fixed Series Hydraulic Lift
Lifting Capacity of 
500
lbs

Add to Cart

Select your Rail Length Below. For Custom Rail Lengths, please Contact Us.

Not Sure if this product is right for you?

Use our online Configure & Price form to discover what lift is right for you.

Configure & Price Your Lift

How much weight does a PrestoMarine® lift add to my boat?

The L200 lift itself adds 155 pounds (70 kg) to your swim platform. The XL500 lift weighs 180–200 pounds (80–90 kg) depending on what type of bracket you choose. With rails you have the higher weight. However, inside your engine room or Lazaretto we must add a hydraulic pump that weighs 38 pounds (17 kg) including one gallon of hydraulic fluid.

The L200 lift itself adds 155 pounds (70 kg) to your swim platform. The XL500 lift weighs 180–200 pounds (80–90 kg) depending on what type of bracket you choose. With rails you have the higher weight. However, inside your engine room or Lazaretto we must add a hydraulic pump that weighs 38 pounds (17 kg) including one gallon of hydraulic fluid.

Should I buy a lift with fixed (F) brackets or the rail (R) system?

If your platform is less than 24 inches (600 cm) long, you should buy an “F” or “fixed system” because the rails will not help balancing the weight on your boat. The dinghy is already as close to transom as possible. With platforms over 32 inches (900 mm) long, you can choose either one of them. The “R” or “rail system” is to get the weight of your PWC close to the transom so that the boats center of gravity does not move too far aft.

If your platform is less than 24 inches (600 cm) long, you should buy an “F” or “fixed system” because the rails will not help balancing the weight on your boat. The dinghy is already as close to transom as possible. With platforms over 32 inches (900 mm) long, you can choose either one of them. The “R” or “rail system” is to get the weight of your PWC close to the transom so that the boats center of gravity does not move too far aft.

Will the additional weight on the stern reduce my boats’ performance?

Any time you add weight to the transom of a boat you will affect performance. The trick is to minimize the lift weight and to keep the center of gravity forward over the swim platform. Our system will keep your tender/pwc untouched by acceleration or deceleration wakes and is less likely to be affected by following seas. Because of the low weight of our lift system we have less impact compare to hydraulic platforms.

Any time you add weight to the transom of a boat you will affect performance. The trick is to minimize the lift weight and to keep the center of gravity forward over the swim platform. Our system will keep your tender/pwc untouched by acceleration or deceleration wakes and is less likely to be affected by following seas. Because of the low weight of our lift system we have less impact compare to hydraulic platforms.

Max Lifting Weight (lbs)
500
lbs
Swim Platform Depth (inches)
Less than 30"
Product Information
Height
35.4
cm
Width
5.1
cm
Length
46.8
cm
Weight
2816
grams
Product Materials
AISI 316
Product Exterior Finish
Powder Coated
Wireless Controlling
Standard
/ 1 Remote Included
Required Voltage
12V
Keel Supports
2 for Tenders, 1 for PWC

Product Photos

No items found.

Product Spec Images

No items found.

Our Customer Success Stories

Read and watch how our customers love their PrestoMarine® Lift.

I use my PrestoMarine® Lift to be able to bring my RHIB when I’m out at sea. I used to have it dragging behind my boat but this is a much better solution. The lift works to my full satisfaction. In just a minute I can launch and haul the RHIB on and off the platform. PrestoMarine® Lift is a really great product many boat owners will enjoy.

Thomas
Halifax, NS
Grand Banks 47

When I bought my new boat, I wanted a good solution in order to bring the Jet used by my son. PrestoMarine® Lift proved to fulfill my wishes. This patent is genius, simple, and the speed of operations is the main advantages. Wherever I land my boat, people gather around and want me to demonstrate the lift. I am so happy with my PrestoMarine® Lift and with the amazing service MA Products provides.

Steven
Victoria, BC
Nord West 560

Ready to Order Your New Lift?

Configure and Price your lift today and start loving boating again.